RIGHT SIDE DISCHARGE / DEFLECTOR
Tractor hydraulic controls are located on the right side; the 2650’s right hand discharge makes it easy to look over your right shoulder and keep your hand on the controls. Adjusting the deflector on the 2650 is a one handed operation. The latch requires only one hand because the torsion springs support the bulk of the deflector’s weight, allowing you to set the deflector to the desired position with very little effort. The optional hydraulic deflector allows the operator to set the deflector position directly from the tractor cab.
TWO STAGE BALE LOADER
The 2650 speeds up the loading process by allowing each bale to be lifted separately without disturbing the other bales. The bale loader also carries a second bale, to increase productivity.
SHREDDER CHAMBER WITH ADJUSTABLE SLUG BARS AND 3 CHAIN SLAT CONVEYOR
Combining these features with the heavy duty flails and high speed rotor, the 2650 shredder chamber will process bales in any condition….. wet, frozen, old, new, or with flattened bottoms. The conveyor is slanted so it helps feed the hay/straw into the rotor. The adjustable slugbar allows the operator to adjust the length of the cut, even with a bale in the chamber.
INLINE P.T.O. DRIVELINE
The 2650 features an Inline P.T.O. Driveline for vibration free turns. The hinged P.T.O. shield allows for easy maintenance. Haybuster’s rugged oil bath chain case reverses rotation and speeds up the rotor 20% to improve processing in all conditions. The inline P.T.O. is available in either a Constant Velocity or a Standard P.T.O. configuration.
EASILY ADJUSTABLE SLUG BARS
The Slug Bars on the 2650 are easily adjustable from a single point. The slug bar adjustment alters the amount of the rotor exposed to the hay, and is adjusted based on the type of hay, moisture content of the hay and the coarseness/fineness of the cut desired.
HEAVY DUTY FRAME
The 2650 has a heavy duty frame for strength and durability.
ROTOR ACCESS DOOR
The 2650 incorporates a rotor access door, giving you quick and easy access to the rotor for routine inspections and twine removal. Two additional stripper bars can be installed on the door to reduce the length of cut.
OIL BATH CHAIN CASE - INCREASES ROTOR SPEED BY 20%
The unit is powered through the in line P.T.O. and oil bath chain case. The chain drive increases the RPM of the rotor by 20%.
HEAVY-DUTY FLAILS AND HIGH SPEED ROTOR
The 2650 features an oil bath chain case to reverse the direction of the P.T.O., increasing the speed and efficiency of the rotor by 20%. Heavy Duty Rotor and Flails process both dry hay and silage bales. No special options are needed, the 2650 does it from the start.
jQuery Slideshow