2100 Balebuster - Bale Processor - Overview
2100 General Specifications
  Total 3,700 lbs. (1,678 kg)
  Width 8 ft. 5 in. (2.6 m) loader & deflector folded.
  Length 12 ft. 9 in. (3.89 m)
  Length 8 ft. 5 in. (2.6 m) caster wheels removed.
  Height 6 ft. 5 in. (1.96 m) loader folded.
  Width 10 ft. 8 in. (3.25 m)
  Length 12 ft. 9 in. (3.89 m)
  Height 6 ft. 5 in. (1.96 m) loader folded
  Width 13 ft. (3.96 m)
  Length 12 ft. 9 in. (3.89 m)
  Height 9 ft. 8-3/4 in. (2.97 m)
  Hitch Semi-Mounted, attaches to lower Lift Links of Tractor's 3-PT Hitch
  Tires (2) 9.5 x 14 -  8-Ply
  Wheels (2) 6 x 14 - 5 Bolt Drop Center
  Bearings Tapered roller
  Axle Caster
  Type Hydraulic with mechanical linkage
  Bale Tines (2) fixed width
  Hydraulic Cylinder (2) 2-1/2" x 16" (6.35 cm x 40.64 cm) double acting
  Type 3 Roller Chains with Bolt-on Cross Slats
  Drive Hydraulic Motor with Hydraulic Flow Control
  Max. Bale Size 6 ft. long x 6-1/2 ft. dia. (1.83 m x 1.98 m)
  Max. Bale Weight 2,000 lbs. (907 kg)
  Rotor Length 78 in. (1.98 m)
  Rotor Diameter (Flails extended) 25 in. (63.5 cm)
  Rotor Bearing Ball, 1-3/4 in. (4.45 cm)
  Number of Flails 30
  Flail Type Heavy Duty Flails, 7/16 in. (11.11 mm) Thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging
  Number of Stripper Plates 1
  Number of Slug Bars 5
  Deflector Shield 6 Adjustment Positions through 120 degree range
  Max. Horizontal Spread Straw up to 50 ft.
  Loader 1 set of Tractor Hydraulic Outlets
  Bale Conveyor 1 set of Tractor Hydraulic Outlets
  Bale Conveyor Speed Adjustable Hydraulic Flow Control Valve
  Slug Bar Shim adjustable
  Deflector Shield Position Hand Lever with 6 Position Settings through 120 degree range
  PTO Horsepower required 65 to 155
  Three Point Hitch CAT II / III
  Min. Hitch Lift Capacity 4,000 lbs. (1,814 kg)
  PTO Type 1000 RPM, 1-3/8 in dia Shaft with 21 Splines
  Min. Hydraulic Output 8 gpm at 1800 psi (30.3 lpm x 12,410.56 kPa)
  Hydraulic Remote Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
  Tractor Weight Must be of equal or greater weight than that of a 2100 BALEBUSTER and 1 Bale
  SMV Sign Standard equipment
  Road Lights Standard equipment
2100 Balebuster Options
Stripper Channel Kit
  This option allows for a finer cut, with the installation of up to 2 additional striper plates.
Category II / III Quick-Tach
  Facilitates faster hooking and unhooking the Big Balebuster from the tractor.
Wide Deflector Belt
  The 18 in. (45.72 cm) wide deflector belt, is used when bunk feeding to inhibit the hay fines from being delivered beyond the deflector shield.
DuraTech Industries International, Inc. reserves the right to change its products or their specifications at any time without notice or obligation. Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.