2574 Balebuster - Bale Processor - Overview
2574 General Specifications
  Total 6,620 lbs (3,002.78 kgs)
  Width w/ Hwy tires 8 ft 6 in (2.59 m)
  Width w/ Flot. Tires 8 ft 9 in (2.67 m)
  Length 16 ft 6 in (5.03 m)
  Height 10 ft 9 in (3.26 m)
WORKING DIMENSIONS (With 1 Bale, Loader Fully Raised.)
  Width 10 ft 3 in (3.12 m)
  Length 16 ft 6 in (5.03 m)
  Height 10 ft 9 in (3.26 m)
WORKING DIMENSIONS (With 2 Bales, Loader in Bale Transport)
  Width 10 ft 3 in (3.12 m)
  Length 22 ft 7in (6.88 m)
  Height 10 ft 9 in (3.26 m)
  Towing Arrangement Clevis Type Hitch, Height Adjustable
  Hitch Jack 7,000 lbs (2,273 kg) rating - 15" lift
  Axle Extension Optional 12 in.
  Wheel Bearing Type Tapered Roller
  Type Hydraulic with 2 Stage Twin Boom Arms
  Bale Tines Tubular Steel with 10° Float, 4 Position Width Adjustable
  Adjustable Hydraulic Cylinder 4 in x 24 in (10.16 cm x 60.96 cm ), Double-Acting
  Type 3 Roller Chains with Bolt-On Cross Slats
  Drive Hydraulic Orbital Motor, Hydraulic Flow Control Valve
  Max. Bale Size 6 ft long x 6-1/2 ft dia (1.68 m x 1.98 m)
  Max. Bale Weight each 2,200 lbs (1,000 kg)
  Rotor Length 78 in. (1.98 m)
  Rotor Diameter (Flails extended) 25 in (63.5 cm)
  Rotor Bearing 2" (5.08 cm)
  Number of Flails 40
  Flail type Heavy Duty, Hardened Spring Steele, Swinging
  Re-Cutter Screen Type Helical-Slotted, Round (5 Sizes)
  Transfer Auger Dia. 12 in (30.48 cm)
  Number of Slug Bars 9
  Slug Bar Height Single Point Adjustment with 9 Settings
  Size 44 in dia (112 m)
  Number of paddles 6(AR 400 Steel)
  Fan Lined with AR 400 Steele  
  Two hydraulic outlets required
1 set - for electic over hydraulics (standard equipment) - controls loader function,
fan spout for vertical and horizontal adjustment. Requires 12 volt DC with 3-pin power outlet.
Bale Conveyor - 1 set of tractor hydraulic outlets
Bale Conveyor Speed - Adjustable hydraulic flow control valve
Slug Bar - Single point adjustment with 9 settings
  Spout Operation - Joy Stick Controlled from Tractor Cab  
  Vertical Fan Housing Rotated by Hydraulic Cylinder
  Horizontal Spout Rotates 360 degrees by Hydraulic Cylinder
  Outlet 3 ft. Curved Spout has an Adjustable Deflector
  Protection Hinged Break-Away, Sheer Bolt Protected
  Order Spout  
  PTO Horsepower Required 125 hp to 150 hp
  PTO Type 1,000 RPM, PTO Shaft with shear bolt protection
  Min. Tractor Hydraulic Output 8 gpm @ 1500 psi (30.3 m @ 10,345 kpa).
  Tractor Hydraulic Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
  Tractor Weight Must be of equal or greater weight than that of a 2574 with 2 bales
  SMV Sign Standard equipment
  Road Lights Standard equipment
2574 Balebuster Options
  (Set of 2) 31x10.5x15 - load rating "C" Highway Rated Tires
  (Set of 2) 12.5L x 15 8 ply Implement tires
Standard or Constant Velocity PTO
Discharge Spouts - 360°
  Select from the following:
  3 ft Curved Spout Kit (open curve) - for most applications such as feeding, bedding and erosion control .
  Enclosed curved spout with flanged end- facilitates farther application of mulch/bedding than the open curved spout- almost as far as straw cannon- and can be rotated 360 degrees.
  Straw Cannon Kit - for bedding and erosion control - shoots straw up to 100 feet.
  Mini-gun Spout - The mini gun gives the operator an adjustable deflector to put on the enclosed curve spout. Thus giving more control of the product stream.
  Additional Spout options:
10” x 25’ and 10” x 50’ hose kits- for placing mulch and bedding more precisely. Great for poultry barns, smaller areas that need to be mulched. Note: there is an adaptor in the hose kit that replaces the spout on the transition.
  Without a Spout - Using just the transition without any spout is useful in areas where distance (0 to 40 ft (12.2m)) is not an issue.
Axle Extensions
  12" bolt on axle extensions - provide improved stability on slopes
2nd Axle with Spindles, Hubs, Bolts and Highway Tires with Rims.
  By adding an axle, you minimize the tongue weight and keep your compaction to a minimum. Available with highway tires only.
Recutter Screen Sizes

Use recutter screens to adjust the length of cut to meet the needs of your application. Screens are available in 2” round, 3” round, 4” round, 4-¼ in x 9-½ in Slotted, and 6-¼ in x 9-½ in Slotted.

  Right and Left. Available with highway tires only.
Containment Kit
  Keeps loose hay and corn stalks in shredder chamber.
DuraTech Industries International, Inc. reserves the right to change its products or their specifications at any time without notice or obligation. Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.