2650 Balebuster - Bale Processor - Overview
2650 General Specifications
  Total 4500 lbs. (2041 kg)
  Tongue (Bale loader fully raised) 1300 lbs. (589.7 kg)
TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded)
  Width 8 ft. 5 in. (2.57 m)
  Length 14 ft. 3 in. (4.34 m)
  Height 11 ft. 1 in. (3.38 m)
WORKING DIMENSIONS (With 1 bale, deflector in spread position)
  Width 11 ft. (3.35 m)
  Length 14 ft. 3 in. (4.34 m)
  Height 11 ft. 1 in. (3.38 m)
WORKING DIMENSIONS (With 2 bales, deflector in spread position)
  Width 11 ft. (3.35 m)
  Length 19 ft. 7 in. (5.97 m)
  Height 11 ft. 1 in. (3.38 m)
  Towing Arrangement Clevis type hitch.
  Jack Capacity 5000 lbs. (2273 kg)
  Jack Travel 10 in (25.4 cm)
  Tires 2) 12.5L x 15 - 8 Ply
  Wheels 2) 10 x 15 - 6 Bolt, Drop Center
  Bearing Type Tapered Roller
  Type Integral 2 Stage, Twin Boom Arms
  Bale Tines Tubular Steel, 10° Float, 4 Position Width
  Adjustable Hydraulic Cylinder 4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting
  Type 3 Roller Chains with Bolt-On Cross Slat
  Drive Hydraulic Orbital Motor with Adjustable Flow Control
  Max. Bale Size 6 ft. long x 6-½ ft. dia. (1.83 m x 1.98 m)
  Max. Bale Weight each 2200 lbs. (1000 kg)
  Rotor Length 78 in. (1.98 m)
  Rotor Diameter (Flails extended) 25 in. (63.5 cm)
  Rotor Bearing Ball, 1-3/4 in. (4.44 cm)
  Number of Flails 30
  Rotor Speed 1300 RPM
  Flail type Heavy Duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging
  Number of Stripper Channels 1
  Number of Slug Bars 5
  Slug Bar Single point, 5 Adjustment Settings through a 180 Degree Range (optional hydraulic adjustment)
  Delivery Right Hand Discharge
  Deflector 6 Adjustment Settings through a 120 Degree Range
  Max. Horizontal Spread Straw, up to 50 ft. (15.24 m)
  Loader 1 Tractor Double-Acting Hydraulic Valve
  Bale Conveyor 1 Tractor Double-Acting Hydraulic Valve
  Bale Conveyor Speed Conveyor Speed Control Valve
  Slug Bar Hand Lever with 5 Settings (optional hydraulic adjustment)
  Deflector Hand Lever with 6 Settings (optional hydraulic adjustment)
  PTO Horsepower Required 65hp (48.5kw) to 155hp (115.6kw)
  PTO Type 1000 RPM, 1-3/8 in. dia. PTO Shaft with 21 Splines choice of Constant Velocity or Standard PTO
  Min. Tractor Hydraulic Output 8 gpm at 1500 psi (46 lpm x 10,345 kPa)
  Tractor Hydraulic Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
  Tractor Weight Must be of equal or greater weight than that of a 2650 with 2 bales
2650 Balebuster Options
  (Set of 2) 31 x 10.5 x 15-ply load rating "C" Highway Rated Tires
  (Set of 2) 14L x 16.1 8-ply Flotation Tires
Stripper Channel Kit
  This option allows for a finer cut, with the installation of up to 2 additional striper plates.
Wide Deflector Belt
  The 18 in. (45.72 cm) wide deflector belt, is used when bunk feeding to inhibit the hay fines from being delivered beyond the deflector shield.
Left Side Extension
  Adds a left side extension to the shredder chamber.
Hydraulic Deflector Control Kit
  This option allows the operator to control deflector and rack positions from the operator’s seat.
2650GT Grain Tank
  The 21GT grain tank is used to meter and apply a grain or supplements to the windrow. The 21GT grain tank has a capacity of 21 bushels (740 liters), and requires 1 set of hydraulic outputs with a minimum output of 8 gpm at 1500 psi (46 lpm x 10,345 kPa).
Fenders Kit
  This kit includes right & left fenders, and uses existing hardware.
Road Lights Kit
  This kit includes right and left rear light assemblies, wiring harness, mounts, and hardware.
Axle Extension Kit
  Extends the 2650's axles 12 inches (30.48 cm) on each side for stability in uneven and steep terrain.
EZ 2000 Series Electronic Scale, Digi-Star
  Weighs only the bale in the shredder chamber.
Net/Gross Mode for determining the new weight or the total weight on the scale (gross weight).
Tare Feature provides a temporary zero for easier operation.
  EZ View 2000's Oversized Display
Scrolling built-in Help Messages
Microprocessor Design
Audio/Visual Feedback from Switches
Rugged Indicator Case made out of Lexan®
Gold-Plated Contacts
Self-Diagnostics Testing
Lbs./kg Selection
International Features and CE Approved
Bolt-On Load Cells Mounts
Four Point Load Cell Mounting.
DuraTech Industries International, Inc. reserves the right to change its products or their specifications at any time without notice or obligation. Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.