logo
2655 Balebuster - Bale Processor - Overview
2655 General Specifications
  
     
WEIGHT
  Total 4700 lbs. (2132 kg)
  Tongue (Bale loader fully raised) 1300 lbs. (589.7 kg)
     
TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded)
  Width 8 ft 4 in (2.52 m)
  Length 14 ft 11 in (4.55 m)
  Height 11 ft (3.35 m)
     
WORKING DIMENSIONS (With 1 bale, deflector in spread position)
  Width 10 ft 10 in (3.31 m)
  Length 14 ft 11 in (4.55 m)
  Height 11 ft (3.35 m)
     
WORKING DIMENSIONS (With 2 bales, deflector in spread position)
  Width 10 ft 10 in (3.31 m)
  Length 19 ft 7 in (5.95 m)
  Height 11 ft (3.35 m)
     
CHASSIS FEATURES
  Towing Arrangement Clevis type hitch.
  Jack Capacity 5000 lbs. (2273 kg)
  Jack Travel 10 in (25.4 cm)
  Tires 2) 12.5L x 15 - 8 Ply
  Wheels 2) 10 x 15 - 6 Bolt, Drop Center
  Bearing Type Tapered Roller
     
BALE LOADER
  Type Integral 2 Stage, Twin Boom Arms
  Bale Tines Tubular Steel, 10° Float, 4 Position Width
  Adjustable Hydraulic Cylinder 4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting
     
BALE CONVEYOR
  Type 3 Roller Chains with Bolt-On Cross Slat
  Drive Hydraulic Orbital Motor with Adjustable Flow Control
     
BALE SHREDDER CHAMBER
  Max. Bale Size 6 ft. long x 6-½ ft. dia. (1.83 m x 1.98 m)
  Max. Bale Weight each 2200 lbs. (1000 kg)
  Rotor Length 78 in. (1.98 m)
  Rotor Diameter (Flails extended) 25 in. (63.5 cm)
  Rotor Bearing Ball, 1-3/4 in. (4.44 cm)
  Number of Flails 40
  Rotor Speed 1300 RPM
  Flail type Heavy Duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging
  Number of Stripper Channels 3
  Number of Slug Bars 9
  Slug Bar Single point, 5 Adjustment Settings through a 180 Degree Range (optional hydraulic adjustment)
  Delivery Right Hand Discharge
  Deflector 6 Adjustment Settings through a 120 Degree Range
  Max. Horizontal Spread Straw, up to 50 ft. (15.24 m)
     
OPERATOR CONTROLS
  Loader 1 Tractor Double-Acting Hydraulic Valve
  Bale Conveyor 1 Tractor Double-Acting Hydraulic Valve
  Bale Conveyor Speed Conveyor Speed Control Valve
  Slug Bar Hand Lever with 5 Settings (optional hydraulic adjustment)
  Deflector Hand Lever with 6 Settings (optional hydraulic adjustment)
     
REQUIREMENTS FOR OPERATION
  PTO Horsepower Required 65hp (48.5kw) to 155hp (115.6kw)
  PTO Type 1000 RPM, 1-3/8 in. dia. PTO Shaft with 21 Splines choice of Constant Velocity or Standard PTO
  Min. Tractor Hydraulic Output 8 gpm at 1500 psi (46 lpm x 10,345 kPa)
  Tractor Hydraulic Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
  Tractor Weight Must be of equal or greater weight than that of a 2655 with 2 bales
     
     
2655 Balebuster Options
Tires
  (Set of 2) 31 x 10.5 x 15-ply load rating "C" Highway Rated Tires
  (Set of 2) 14L x 16.1 8-ply Flotation Tires
   
Wide Deflector Belt
  The 18 in. (45.72 cm) wide deflector belt, is used when bunk feeding to inhibit the hay fines from being delivered beyond the deflector shield.
   
Hydraulic Deflector Control Kit
  This option allows the operator to control deflector and rack positions from the operator’s seat.
   
Hydraulic Slugbar Kit
  This option allows the operator to adjust the slugbar from the operator's seat.
   
24 bu Feed Tank
 

The 24 bu Feed Tank is used to meter and apply a grain or supplements to the windrow. The 24 bu Feed Tank has a capacity of 24 bushels (846 liters), and requires 1 set of hydraulic outputs with a minimum output of 8 gpm at 1500 psi (46 lpm x 10,345 kPa).

   
Road Lights Kit
  This kit includes right and left rear light assemblies, wiring harness, mounts, and hardware.
   
Axle Extension Kit
  Extends the 2655's axles 12 inches (30.48 cm) on each side for stability in uneven and steep terrain.
   
Fenders Kit
  This kit includes right & left fenders, and uses existing hardware.
   
EZ 2000 Series Electronic Scale, Digi-Star
  Functions
 

Weighs only the bale in the shredder chamber.
Net/Gross Mode for determining the new weight or the total weight on the scale (gross weight).
Tare Feature provides a temporary zero for easier operation.

  Features
  EZ View 2000's Oversized Display
Scrolling built-in Help Messages
Microprocessor Design
Audio/Visual Feedback from Switches
Rugged Indicator Case made out of Lexan®
Gold-Plated Contacts
Self-Diagnostics Testing
Lbs./kg Selection
International Features and CE Approved
Bolt-On Load Cells Mounts
Four Point Load Cell Mounting
   
DuraTech Industries International, Inc. reserves the right to change its products or their specifications at any time without notice or obligation. Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.