2665 Balebuster - Bale Processor - Overview
2665 General Specifications
  Total 5,150 lbs (2,336 kg)
  Tongue (Bale loader fully raised) 1560 lbs (707.6 kg)
TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded)
  Width 8' 4" (2.54 m)
  Length 14' 11" (4.55 m)
  Height 11' (3.35 m)
WORKING DIMENSIONS (With 1 bale, deflector in spread position)
  Width 10' 10" (3.30 m)
  Length 14' 11" (4.55 m)
  Height 11' (3.35 m)
WORKING DIMENSIONS (With 2 bales, deflector in spread position)
  Width 10' 10" (3.30 m)
  Length 19' 7" (5.97 m)
  Height 11' (3.35 m)
  Towing Arrangement Clevis type hitch.
  Jack Capacity 5000 lbs. (2268 kg)
  Jack Travel 10 in (25.4 cm)
  Bearing Type Tapered Roller
  Type Integral 2 Stage, Twin Boom Arms
  Bale Tines Tubular Steel, 10° Float, 4 Position Width Adjustable
  Hydraulic Cylinder 4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting
  Type 3 Roller Chains with Bolt-On Cross Slat
  Drive Hydraulic Orbital Motor with Adjustable Flow Control
  Drive Shaft Bearings 1-1/4" (3.18 cm)
  Drive Shafts 1-1/4" (3.18 cm)
  Max. Bale Weight each 2200 lbs. (998 kg)
  Rotor Length 78 in. (1.98 m)
  Rotor Diameter (Flails extended) 25 in. (63.5 cm)
  Rotor Bearing Ball, 2" (5.08 cm)
  Rotor Speed 1300 RPM
  Number of Flails 40
  Flail type Heavy Duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging
  Number of Stripper Channels 3
  Number of Slug Bars 9
  Slug Bar Single point, 9 Adjustment Settings through a 180 Degree Range (optional hydraulic adjustment)
  Delivery Right Hand Discharge
  Deflector 6 Adjustment Settings through a 120 Degree Range (optional hydraulic adjustment)
  Max. Horizontal Spread Straw, up to 50 ft. (15.24 m)
  Loader 1 Tractor Double-Acting Hydraulic Valve
  Bale Conveyor 1 Tractor Double-Acting Hydraulic Valve
  Bale Conveyor Speed Conveyor Speed Control Valve
  Slug Bar Hand Lever with 5 Settings (optional hydraulic adjustment)
  Deflector Hand Lever with 6 Settings (optional hydraulic adjustment)
  PTO Horsepower Required 65hp (48.5kw) to 155hp (115.6kw)
  PTO Type 1000 RPM, 1-3/8 in. dia. PTO Shaft with 21 Splines choice of Constant Velocity or Standard PTO
  Min. Tractor Hydraulic Output 8 gpm at 1500 psi (30.3 lpm x 10,345 kPa)
  Tractor Hydraulic Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
  Tractor Weight Must be of equal or greater weight than that of a 2665 with 2 bales
  SMV Sign Standard equipment
  Road Lights Standard equipment
2665 Balebuster Options
  (Set of 2) 14L X 16.1 10 ply Knobby Tires
  (Set of 2) 31 x 10.5 x 15-ply load rating "C" Highway Rated Tires
  (Set of 2) 14L x 16.1 8-ply Flotation Tires
Wide Deflector Belt
  The 18 in. (45.72 cm) wide deflector belt, is used when bunk feeding to inhibit the hay fines from being delivered beyond the deflector shield.
Hydraulic Deflector Control Kit
  This option allows the operator to control deflector and rack positions from the operator’s seat.
Hydraulic Slugbar Kit
  This option allows the operator to adjust the slugbar from the operator's seat.
24 bu Feed Tank

The 24 bu Feed Tank is used to meter and apply a grain or supplements to the windrow. The 24 bu Feed Tank has a capacity of 24 bushels (846 liters), and requires 1 set of hydraulic outputs with a minimum output of 8 gpm at 1500 psi (46 lpm x 10,345 kPa).

Road Lights Kit
  This kit includes right and left rear light assemblies, wiring harness, mounts, and hardware.
Axle Extension Kit
  Extends the 2655's axles 12 inches (30.48 cm) on each side for stability in uneven and steep terrain.
Fenders Kit
  This kit includes right & left fenders, and uses existing hardware.
EZ 2000 Series Electronic Scale, Digi-Star

Weighs only the bale in the shredder chamber.
Net/Gross Mode for determining the new weight or the total weight on the scale (gross weight).
Tare Feature provides a temporary zero for easier operation.

  EZ View 2000's Oversized Display
Scrolling built-in Help Messages
Microprocessor Design
Audio/Visual Feedback from Switches
Rugged Indicator Case made out of Lexan®
Gold-Plated Contacts
Self-Diagnostics Testing
Lbs./kg Selection
International Features and CE Approved
Bolt-On Load Cells Mounts
Four Point Load Cell Mounting
DuraTech Industries International, Inc. reserves the right to change its products or their specifications at any time without notice or obligation. Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.