2800 Balebuster - Bale Processor - Overview
2800 General Specifications
  Total 7,300 lbs. (3,311 kg)
  Tongue Weight (Bale loader fully raised) 2,550 lbs. (1,156 kg)
  Tongue Weight (Bale loader down) 2,150 lbs. (975 kg)
TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded)
  Width 8'-5", 101 in. (2.57 m)
  Length 17'-7", 211 in. (5.36 m)
  Height 8'-6", 102 in. (2.59 m)
WORKING DIMENSIONS (With 1 bale, deflector in spread position)
  Width 10'-10", 130 in. (3.30 m)
  Length 24'-2", 290 in. (7.37 m)
  Height 10', 120 in. (2.59 m)
WORKING DIMENSIONS (With 2 bales, deflector in spread position)
  Width 10'-10", 130 in. (3.30 m)
  Length 27'-5", 329 in. (8.36 m)
  Height 10', 120 in. (2.59 m)
  Towing Arrangement Clevis type hitch
  Jack Capacity 7,000 lbs. (3,175 kg)
  Jack Travel 10 in. (25.4 cm)
  Tires (2) 16.5 x 16.1 - 10 ply
  Wheels (2) 16.1 x 12 - 8 bolt, drop center
  Bearing Type Tapered Roller
  Type Hydraulic twin boom arms, squeeze arms for square bales
  Bale Tines Tubular Steel, 10 degree float, 4-position adjustment for round bales
  Type 4 roller chains with bolt-on cross slat
  Drive Hydraulic Orbital Motor with Adjustable Flow Control
  Sealed oil lube chain case reverses rotation and increases rotor speed; double 60-roller chain
  Max. Bale Size Round: 6 ft. long x 6.5 ft. dia. (1.83 m x 1.98m)
Square: 52" x 52" x 8 ft. (1.32 m x 1.32 m x 2.4 m)
  Max. Bale Weight Each 2,200 lbs. (1,000 kg)
  Shredder Chamber Length 120 in. (3.04 m)
  Shredder Chamber Width 91 in. (2.31 m)
  Rotor Diameter 26 in. (66 cm) Flails extended
  Rotor Bearing Ball, 2 in. (5.08 cm)
  Number of Flails 40
  Flail type Heavy duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat treated spring steel, swinging
  Number of Stripper Plates Not available at this time
  Deflector Split, Hydraulic with infinite settings through a 120° range
  Max. Horizontal Spread Straw up to 50 ft. (15.24 m)
  Loader, Conveyor, Defector, Squeeze loader, and Slug Bar
-1 Hydraulic Remote with Electric over Hydraulic Finger Tip Controls
Bale Conveyor Speed - Conveyor speed control valve
Slug bar - Hydraulic adjustment with infinite adjustment
Deflector Position Setting - Hydraulic with split deflector
  PTO Horsepower Required 90 hp (67.1 kw) minimum
  PTO Type 1000 RPM, 1-3/8 in. (3.49 cm) diameter shaft with 21 splines.
  Min. Tractor Hydraulic Output 8 gpm at 1500 psi (30.3 lpm X 10,345 kPa)
  Hydraulic Remote Controls (1) Double-Acting Control Valve with Quick Coupler Outlets
  Tractor Weight Must be of equal or greater weight than that of a 2800 APB with 2 bales
  SMV Sign Standard equipment
  Road Lights Standard equipment
2800 Balebuster Options
There are no options available at this time.
DuraTech Industries International, Inc. reserves the right to change its products or their specifications at any time without notice or obligation. Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.