Follow Haybuster
H-1135 Big Bite - Tub Grinder - Overview
H-1135 Big Bite General Specifications
 |
||
| WEIGHT | ||
| Total | 14,500 lbs, (6,577.1 kg) | |
| Hitch (with conveyor folded) | 1,925 lbs. (873.2 kg) | |
| TRANSPORT DIMENSIONS | ||
| Width | 11' 4' (3.45 m) | |
| Height | 10' 7" (3.2 m) | |
| Length | 21' 8" (6.6 m) | |
| OPERATING DIMENSIONS | ||
| Total Width | 11' 3" (3.43 m) | |
| Total Width, Tub Raised | 12' 6" (3.81 m) | |
| CHASSIS FEATURES | ||
| Towing Arrangement | Clevis hitch | |
| Tires | 2) 445/50Rx22.5 5.5 Implement Tires | |
| Wheels | (2) 22.5 X 13, 8 bolt , 6" (15.24 cm) Pilot | |
| Bearings | Tapered roller | |
| TUB FEATURES | ||
| Loading Height | 9' 2" (2.79 m) | |
| Tub Width at Flare | 11' 3" (3.43 m) | |
| Depth | 50" (1.27 m) | |
| Tub Inside dia at Base | 8' 11" (2.72 m) | |
| Tub Wall Thickness | 12 gauge (2.66 cm) | |
| Tub Floor Thickness | 10 gage (3.42 mm) | |
| HAMMERMILL - HEAVY DUTY | ||
| Length | 50" (127 cm) | |
| Diameter, Hammers Extended | 26" (66.04 cm) | |
| Feed Opening | 28” x 52” (71.1 cm X 132.08 cm) | |
| Hammers | HD-1/2" (12.7cm) Forged Swing | |
| Number of Hammers | 88 | |
| Hammer Rods | 1-1/4" (31.75 mm), Case Hardened Steel | |
| Cylinder Plates | HD Mills, 1/2" (12.7 mm) thick X 15.75" (40.01 cm) | |
| Cylinder Shaft | 3 1/2" (8.89 cm) Stress Proof Steel | |
| Bearings | 3 1/4" (8.26 cm) Pillow Block | |
| Drive | PTO through Multiple V-Belts, 1,000 RPM, 1-3/8" dia. 21 spline shaft, or 1-3/4" dia. 20 spline shaft | |
| 9 BAR MILL GRATE/GEYSER PLATE | For improved grinding performance in tough hay and stover | |
| Screens | 1/8" (3.18 mm), 3/16" (4.76 mm), or ¼" (6.35 mm) Thick and Various Hole Sizes from 1/8" (3.18 mm) to 8" (203.2 mm) - Must Order 2 Screens of Choice With Machine-Not Standard equipment | |
| BELLY AUGERS | ||
| Type | Twin 12" (30.48 cm diameter - 4'-6"(1.37 m) long) | |
| Drive | Hydraulic | |
| DISCHARGE CONVEYOR | ||
| Type | Rubber Belt with Cleats | |
| Drive | Hydraulic | |
| Drive & Idler Roller Type | Rubber Lagged Drive Pulley, "Easy Clean" Idler | |
| Length | 26' (7.92 m) | |
| Width | 24" (60.96 cm) | |
| Maximum Conveyor Lift Height | 18' 6" (5.64 m) @ 40 Degree Incline Conveyor Lift | |
| Conveyor Lift Cylinder | 3" x 20" (7.62 cm x 50.8 cm) | |
| Conveyor Lift & Fold | Hydraulic | |
| OPERATOR CONTROLS | ||
| Tub Rotation | 3 Position Hydraulic Valve; Clockwise, Stop, and Counter-Clockwise | |
| Tub Speed | Wachendorf Electronic Governor Stabilizes Engine Load by Adjusting Tub Rotation Speed | |
| Conveyor Lift | 3-Position Hydraulic Valves for Raise, Hold and Lower | |
| Conveyor Fold | 3-Position Hydraulic Valves for Fold, Hold and Unfold | |
| Conveyor On/Off | 2-Position Hydraulic Valves for Forward/Off | |
| Tub Tilt | Tractor Hydraulic | |
| Remote Control | Controls tub forward, stop, reverse and speed. Controls conveyor raise and lower. | |
| REQUIREMENTS FOR OPERATION TRACTOR | ||
| PTO Horsepower Required | 200 HP (149.1 kw) to 315 HP (234.90 kw) | |
| Min. Hydraulic Output | 8 gpm at 1,500 psi (30.3 lpm. x 10,345 kPa) | |
| Hydraulic Remote Controls | 2- Double Acting Valves with Quick Coupler Outlets | |
| Electrical | 12 VDC | |
| GRINDER | ||
| Hydraulic Reservoir Capacity | 60 gallons (227.13 L) of Hydraulic Oil (Mobile 423, CENEX Super HTB or Equivalent) |
|
H-1135 Big Bite Options
Sorry, there are currently no videos for this product.
