CMF-430 - Vertical Mixer - Overview
CMF-430 General Specifications
  Total 8,120 lbs (3683.2 kgs)
  Tongue Weight 960 lbs (435.4 kgs)
  Width 10 ft. 8 in. (3.25 m)
  Length 16 ft. 6 in. (5.03 m)
  Height 9 ft. 10 in. (3.0 m)
  Width Between 10'-8" and 14' Depending on Conveyor
  Loading Height With Extensions 9 ft. 10 in. (3.0 m)
  Towing Arrangement Clevis Type Hitch/Pintle
  Jack Capacity 7,000 lbs. (3,175.1 kg)
  Jack Travel 10 in. (25.4 cm)
  Tires (2) 14L-16.1-12 ply
  Wheels (2) 8 hole
  Axle Rigid
  Bearings Tapered Roller
  Extensions 12 inch rubber
  Mixing Capacity with 12" Extension 436 cu. Ft (12.35 cu. m)
  Gross Weight Capacity 19,100 lbs (8,663.6 kg)
  Tare Weight - TMR 10,750 lbs (4,876.1 kg)
  Number 1
  Diameter 88 in. (223.52 cm)
  Flighting Thickness 5/8 in. (1.59 cm)
  Number / Thickness Knives 7, 5/16 in. (0.3125 in.) Self-Sharpening
  Drive Line 1 3/8 in. (3.49 cm)
Constant Velocity 540 rpm PTO Shaft, Optional 2-Speed Gearbox
  Protected Clutch (1) Free motion automatic clutches
  Gearboxes (1) HD gearbox with 2 year warranty
  Door 43 in. (109.22 cm) wide x 36 in. (91.44 cm) long
  Discharge Height 30 in. (76.2 cm)
  Discharge Options Left or Right
  Door Opening 24 in. (60.96 cm) x 42 in. (106.68 cm)
  Floor Thickness 5/8 in. (1.59 cm)
  Side Wall Thickness 1/4 in. (0.635 cm)
  Scale Digi-Star 4 point scale with optional monitor
  PTO Horsepower Required 80 HP Minimum
  PTO Type 540 rpm, 1-3/8 in. Dia. With 6 Spline
  Min. Tractor Hydraulic Output 8 gpm at 1500 psi (30.3 lpm X 10,345 kPa)
  SMV Sign and Road Lights Standard Equipment
  Electrical 12 VDC (battery included)
CMF-430 Options
Magnets on chutes/spouts
  Discharge magnets on the chutes/spouts remove ferrous metal, such as bale wire, from feed, providing the highest quality feed available.
Left or right door opening
  Optional left or right door opening with discharge conveyor options of 3’ or 5’ provide the ultimate flexibility for feeding applications. The 3’ conveyor has a feed height ranging from 36” to 44”. The 5’ conveyor has a feed range from 45” to 58”.
2 speed gear box
  The 2 speed gear box is used for heavy starts after transporting heavy rations to protect the tractor PTO and mixers drive train.
Digi-Star Scale
  Choose from any Digi-Star scale indicator  (see Digi-Star link below)
  Also available are optional Digi-Star Feed Management Programs.
Sorry, there are currently no videos for this product.
DuraTech Industries International, Inc. reserves the right to change its products or their specifications at any time without notice or obligation. Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.