CMF-830 - Vertical Mixer - Overview
CMF-830 General Specifications
  Total 17,900 lbs. (8,119.3 kg)
  Tongue Weight 2,100 lbs. (952.5 kg)
  Width 10' 2" (3.1 m)
  Length 24' 8" (7.5 m)
  Height 10' 8" (3.3 m)
  Loading Height with Extensions 10' 8" (3.3 m)
  Width Between 10'-2" and 12' Depending on Conveyor
  Towing Arrangement Clevis Type Hitch
  Jack Capacity 7,000 lbs. (3,175.1 kg)
  Jack Travel 10 in. (25.4 cm)
  Tires (4) 315/80R22.5 20 ply
  Wheels (4) 22.5 x 9 - 10 hole
  Axle Oscillating
  Bearings Tapered Roller
  Extensions 12" Rubber
  Mixing capacity 830 cu. ft. (23.5 cu. m)
  Gross Weight Capacity 39,400 lbs. (17,871.5 kg)
  Tare Weight - TMR 21,500 lbs. (9,752.24 kg)
  Number 2
  Diameter 88 in. (223.52 cm)
  Flighting Thickness 5/8 in. (1.59 cm)
  Number / Thickness Knives 14-1/4 in (.635 cm) self-sharpening
  Drive Line 1 ¾” (4.45 cm) Constant velocity 1000 RPM PTO shaft
Optional two-speed gear box with 1 ¾” 1000 RPM PTO for loaded startups
  Clutch Free motion automatic clutches (2)
  Gearboxes 2- HD gearboxes with 2 year warranty
  Type 36 in. (91.44 cm) Chain With Hydraulic Orbital Motors
  Discharge Height 26 5/8 in. (67.63 cm) to 55 in. (139.7 cm)
  Discharge Options Left, right, both
  Door Opening 24 in. (60.96 cm) x 42 in. (106.68 cm)
  Floor Thickness 5/8 in. (1.59 cm)
  Side Wall Thickness 1/4 in. (0.635 cm)
  Scale Digi-Star 4 point scale with optional monitor
  Observation Windows 2
  PTO Horsepower Required 150 HP minimum
  PTO Type 1000 RPM, 1 3/4" dia PTO Shaft with 20 splines
  Min. Tractor Hydraulic Output 8 gpm at 1500 psi (30.3 lpm X 10,345 kPa)
  SMV Sign and Road Lights Standard Equipment
  Electrical 12 VDC (battery included)
CMF-830 Options
Magnets on discharge spouts
  Magnets on the spouts remove ferrous metal, such as bale wire, from feed, providing the highest quality feed available.
Left, right, or dual discharge conveyors
  Optional left, right, or dual discharge conveyors provide the ultimate flexibility for feeding applications.
Dogleg Style Conveyor Optional
Unloading Options
  Cross Conveyor only with right or left hand drives.
  Cross Conveyor with spouts or endgates. Magnets are available for the spouts.
  Cross Conveyor with hydraulic conveyor extension. Available in right hand, left hand, or both right and left hand unload. The dual discharge unit can only unload from one side at one time. Spouts and optional magnets are also available.
Rear discharge door
  The optional rear discharge door provides an additional means of discharging feed.
2 speed gear box
  The 2 speed gear box is used for heavy starts after transporting heavy rations to protect the tractor PTO and mixers drive train.
Digi-Star Scale
  Choose from any Digi-Star scale indicator  (see Digi-Star link below)
  Also available are optional Digi-Star Feed Management Programs.
DuraTech Industries International, Inc. reserves the right to change its products or their specifications at any time without notice or obligation. Illustrations, specifications, and descriptions contained herein were accurate at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.