Follow Haybuster
CMF-980 - Vertical Mixer - Overview
CMF-980 General Specifications
 |
||
| WEIGHT | ||
| Total | 19,100 lbs (8,663.61 kg) | |
| Tongue Weight | 2,480 lbs (1,124.91 kg) | |
| TRANSPORT DIMENSIONS | ||
| Width | 10' 6" (3.2 m) | |
| Length | 25' 7" (7.8 m) | |
| Height | 11' 2" (3.4 m) | |
| WORKING DIMENSIONS | ||
| Width | Between 10'-6" and 12'-4" Depending on Conveyor | |
| Loading Height | 11' 2" (3.4 m) | |
| CHASSIS FEATURES | ||
| Towing Arrangement | V-Block or Clevis type hitch | |
| Jack Capacity | 7,000 lbs. (3,175.1 kg) | |
| Jack Travel | 10 in. (25.4 cm) | |
| Tires | (4) 385/65 R 22.5 20-ply | |
| Axle | Oscillating | |
| Bearing Type | Tapered Roller | |
| Extensions | 12" rubber (standard) | |
| CAPACITIES | ||
| Mixing Capacity W/ 12" Extension | 980 cu. ft. (27.75 cu. m) | |
| Gross Weight Capacity | 50,000 lbs. (22,679 .62 kg) | |
| Tare Weight - TMR | 30,900 lbs (14,016 kg) | |
| AUGERS | ||
| Number | 2 | |
| Diameter | 88 in. (223.52 cm) | |
| Flighting Thickness | 5/8 in. (1.59 cm) | |
| Number / Thickness Knives | 14-5/16" (0.794 cm) thick Self-Sharpening |
|
| DRIVELINE AND GEAR BOXES | ||
| Drive Line | 44E Series Drivelines With Two-Speed Gearbox (Standard Equipment) | |
| Clutch | Free Motion Automatic Clutches (2) | |
| Gearboxes | (2) HD Gear Boxes With 2-Year Warranty | |
| UNLOADING CONVEYOR | ||
| Type | 36 in. (91.44 cm) Chain Without Hydraulic Orbital Motors | |
| Discharge Height | 26 5/8 in. (67.63 cm) to 55 in. (139.7 cm) | |
| Discharge Options | left, right, both, rear commodity door | |
| MISCELANEOUS | ||
| Door Opening | 24 in. (60.96 cm) x 42 in. (106.68 cm) | |
| Floor Thickness | 3/4 in. (1.91 cm) | |
| Side Wall Thickness | 1/4 in. (0.635 cm) with 24" (60.96 cm) 12 Gauge Replaceable Steel Wall Liner | |
| Scale | Digi-Star 4-Point Scale With Optional Digi-Star Scale Monitor | |
| Observation Windows | 2 | |
| REQUIREMENT FOR OPERATION | ||
| PTO Horsepower Required | 150 HP minimum recomended | |
| PTO Type | 1,000 rpm, 1 3/4" Dia with 20 Spline or 1,000 rpm, 1 3/8" Dia with 21 Spline |
|
| SMV Sign and Road Lights | Standard Equipment | |
| Electrical | 12 VDC (battery included) | |
CMF-980 Options
| Magnets on discharge spouts | ||
| Magnets on the spouts remove ferrous metal, such as bale wire, from feed, providing the highest quality feed available. | ||
| Left, right, or dual discharge conveyors | ||
| Optional left, right, or dual discharge conveyors provide the ultimate flexibility for feeding applications. | ||
| 3 ft. Hydraulic discharge conveyor extension. | ||
| Unloading Options | ||
| Cross Conveyor only with right or left hand drives. | ||
| Cross Conveyor with spouts or endgates. Magnets are available for the spouts. | ||
| Cross Conveyor with hydraulic conveyor extension. Available in right hand, left hand, or both right and left hand unload. The dual discharge unit can only unload from one side at one time. Spouts and optional magnets are also available. | ||
| Rear discharge door | ||
| The optional rear discharge door provides an additional means of discharging feed. | ||
| Digi-Star Scale | ||
| Choose from any Digi-Star scale indicator (see Digi-Star link below) | ||
| Also available are optional Digi-Star Feed Management Programs. | ||
| www.digi-star.com | ||
